mirror of
https://github.com/bolucat/Archive.git
synced 2026-04-23 00:17:16 +08:00
github-action[bot]
22 lines
1.5 KiB
Markdown
22 lines
1.5 KiB
Markdown
# Client Installation & Configuration - OpenWrt
|
|
|
|
OpenWrt is a minimal Linux distribution, and additional steps are required to run the mieru client in an OpenWrt environment. Please refer to the [Client Installation & Configuration](./client-install.md) guide, and follow the instructions here to install and configure the mieru client.
|
|
|
|
## Download mieru client
|
|
|
|
After downloading the mieru client software, please copy the extracted mieru executable file to the `/usr/bin/` directory on the OpenWrt system.
|
|
|
|
## Modify proxy client settings
|
|
|
|
To allow other devices to connect to the proxy client on OpenWrt, you must set `socks5ListenLAN` to `true`. If you enable HTTP/HTTPS proxy, `httpProxyListenLAN` must also be set to `true`.
|
|
|
|
In OpenWrt, do not use the `mieru apply config <FILE>` and `mieru describe config` commands. Please save the client configuration directly to the `/etc/mieru_client_config.json` file.
|
|
|
|
Additionally, it is recommended to set the log level `loggingLevel` to `ERROR` to prevent logs from filling up the disk.
|
|
|
|
## Start proxy client
|
|
|
|
To start and stop the client, please do not use the `mieru start` and `mieru stop` commands. Please copy the `configs/examples/etc_initd_mieru` file from the project root directory to the `/etc/init.d/mieru` file, and grant it executable permission. Afterwards, the mieru client will automatically start when OpenWrt boots up.
|
|
|
|
If you need to manually start or stop the mieru client, you can use the commands `/etc/init.d/mieru start` and `/etc/init.d/mieru stop`.
|